Manufacturer of Ionizer Ozone Generator - Ozone Compatible Venturi Injectors – Dino Detail:
OZONE VENTURI INJECTOR
Dino Purification’s venturi injectors are differential pressure injectors with internal mixing vanes. Superiority of Dino injectors is due to the unique, patented design which maximizes injector efficiency, suction capacity and mixing capabilities. The operating costs of Dino injectors are lower than less efficient systems, and Dino injectors are trouble-free because they have no moving parts.
How a Venturi Injector Works
When pressurized water enters the injector inlet, it is constricted toward the injection chamber and changes into a high-velocity jet stream. The increase in velocity through the injection chamber results in a decrease in absolute pressure, creating a vacuum, thereby enabling an additive material to be drawn through the suction port and entrained into the water stream. As the jet stream is diffused toward the injector outlet, its velocity is reduced and it is reconverted into lower pressure energy.
Performance
Dino Purification venturi injectors operate over a wide range of pressures and require only a minimal pressure differential between the inlet and outlet sides to initiate a vacuum at the suction port. The injectors’ internal mixing vanes create thousands of micro bubbles which greatly increases the surface area of gas (oxygen, ozone, etc.) in contact with the liquid (several micro bubbles have a greater surface area than one large bubble of the same volume).
Product technic data:
Model |
Flow rate |
Fluid connection |
Gas port connection |
Material |
Max pressure |
Max Temperature |
Length (mm) |
A12057 |
0.83-3.33 LPM |
1/4” MNPT |
1/8” Barb |
PVDF |
200 PSI (14.06 Bar) |
200°F (93.33°C) |
57 |
A25100 |
3.33-16.6 LPM |
1/2“ MNPT |
1/4” Barb |
100 |
|||
A25152 |
16.6-50 LPM |
3/4“ MNPT |
1/4” Bard |
152 |
|||
A32235 |
50-166 LPM |
1“ MNPT |
1/2” Barb |
230 |
|||
A48275 |
166-416 LPM |
1.5“ MNPT |
1/2” Barb |
275 |
|||
A58295 |
416-833 LPM |
2“ MNPT |
1/2.5” Barb |
295 |
Why Dino?
Over 12 years of manufacturing and marketing experience
High quality with low cost compared to others mixing device
Safe to use as the chemicals are injected under vacuum, not pressure
Injectors are available in stainless steel, Polypropylene (PP), Polyvinylidene Fluoride (PVDF)
Product detail pictures:
Related Product Guide:
After the storms, it’s microgrid season in the Caribbean | Tube Ozone Generator
New Nanofiber Marks Important Step In Next Generation Battery and Water Electrolysis Development | Research Horizons | Ozoniser
We're convinced that with joint endeavours, the business between us will bring us mutual benefits. We are able to guarantee you products high quality and competitive value for Manufacturer of Ionizer Ozone Generator - Ozone Compatible Venturi Injectors – Dino, The product will supply to all over the world, such as: Pakistan, Toronto, Amsterdam, We only supply quality items and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom merchandise etc that can according to customer's requirement.
By Norma from Plymouth - 2018.04.25 16:46
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Grace from New Zealand - 2017.07.07 13:00