China Factory for Ozone Cell - Ozone Compatible Venturi Injectors – Dino Detail:
OZONE VENTURI INJECTOR
Dino Purification’s venturi injectors are differential pressure injectors with internal mixing vanes. Superiority of Dino injectors is due to the unique, patented design which maximizes injector efficiency, suction capacity and mixing capabilities. The operating costs of Dino injectors are lower than less efficient systems, and Dino injectors are trouble-free because they have no moving parts.
How a Venturi Injector Works
When pressurized water enters the injector inlet, it is constricted toward the injection chamber and changes into a high-velocity jet stream. The increase in velocity through the injection chamber results in a decrease in absolute pressure, creating a vacuum, thereby enabling an additive material to be drawn through the suction port and entrained into the water stream. As the jet stream is diffused toward the injector outlet, its velocity is reduced and it is reconverted into lower pressure energy.
Performance
Dino Purification venturi injectors operate over a wide range of pressures and require only a minimal pressure differential between the inlet and outlet sides to initiate a vacuum at the suction port. The injectors’ internal mixing vanes create thousands of micro bubbles which greatly increases the surface area of gas (oxygen, ozone, etc.) in contact with the liquid (several micro bubbles have a greater surface area than one large bubble of the same volume).
Product technic data:
Model |
Flow rate |
Fluid connection |
Gas port connection |
Material |
Max pressure |
Max Temperature |
Length (mm) |
A12057 |
0.83-3.33 LPM |
1/4” MNPT |
1/8” Barb |
PVDF |
200 PSI (14.06 Bar) |
200°F (93.33°C) |
57 |
A25100 |
3.33-16.6 LPM |
1/2“ MNPT |
1/4” Barb |
100 |
|||
A25152 |
16.6-50 LPM |
3/4“ MNPT |
1/4” Bard |
152 |
|||
A32235 |
50-166 LPM |
1“ MNPT |
1/2” Barb |
230 |
|||
A48275 |
166-416 LPM |
1.5“ MNPT |
1/2” Barb |
275 |
|||
A58295 |
416-833 LPM |
2“ MNPT |
1/2.5” Barb |
295 |
Why Dino?
Over 12 years of manufacturing and marketing experience
High quality with low cost compared to others mixing device
Safe to use as the chemicals are injected under vacuum, not pressure
Injectors are available in stainless steel, Polypropylene (PP), Polyvinylidene Fluoride (PVDF)
Product detail pictures:
Related Product Guide:
Annual Laser Market Review & Forecast 2019: What goes up… | Electrolysis Oxygen Generator
After the storms, it’s microgrid season in the Caribbean | Tube Ozone Generator
High-quality comes 1st; support is foremost; business is cooperation" is our small business philosophy which is regularly observed and pursued by our organization for China Factory for Ozone Cell - Ozone Compatible Venturi Injectors – Dino, The product will supply to all over the world, such as: South Korea, Georgia, Finland, By adhering to the principle of "human oriented, winning by quality", our company sincerely welcomes merchants from at home and abroad to visit us, talk business with us and jointly create a brilliant future.
By Phoenix from US - 2017.05.21 12:31
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
By Nick from Bulgaria - 2017.10.25 15:53