UVOZ 1200 Ozone Concentration Monitor Portable Ozone Meter Gas Ozone Analyzer

Short Description:

Product characteristics1) Test method: dual-light path ultraviolet light absorption method, long-life light source system, high measurement accuracy.2) Measurement principle: according to the Lambert-Bill law, accurately measured through the luminosity absorption principle.3) Light sour...


Product Detail

Product Tags

 

Product characteristics

1) Test method: dual-light path ultraviolet light absorption method, long-life light source system, high measurement accuracy.

2) Measurement principle: according to the Lambert-Bill law, accurately measured through the luminosity absorption principle.

3) Light source system: long-life ultraviolet light source system (wavelength 253.7nm).

4) Usage: indoor installation and use, equipped with power supply and signal terminals.

5) Optical pool system: separated optical pool technology, no leakage, high pressure resistance, high flow resistance to sampling gas impact.

6) Intelligent compensation: built-in temperature and pressure compensation and display, with light source automatic compensation function.

7) Operation mode: users can select manual and automatic zero according to the operation status, and set automatic zero time.

8) Display units: g / Nm3, mg / NL,%WT, ppm, mg / Nm3 is optional.

9) Data display: high-definition color touch screen, high concentration range set into the gas mass flow, real-time display output.

10) Output function: 4-20mA, RS485 communication, two groups of alarm point output, electronic flow meter input, etc.

Ozone Gas Concentration Analyzer-Positive Pressure Sampling Connecting Process

3

Technical Parameter

Measuring range 0-300g / Nm3
Optional range 0-200g / Nm3,0-100g / Nm3,0-50g / Nm3,0-1000ppm, 0-100ppm
Light source life about 30000-50000 hours
Sampling method positive pressure sampling, negative pressure sampling (optional)
Display interface 4.3-inch touch screen operation interface
Content interface Ozone concentration, temperature and pressure
Auxiliary functions temperature compensation, pressure compensation
Display units g / Nm3, mg / NL,%WT, ppm, mg / Nm3 is optional
Display resolution 0.01 g/m3,0.01ppm
Gas flow rate 0.5L±0.2L/min
Input pressure <0.1Mpa
Concentration error maximum of 0.3%FS
Linear error maximum of 0.2%FS
Zero-point drift <± 0.3%.FS
Reaction time 0.03 seconds of signal, 0.3 seconds of display
Ambient temperature -20~50℃
Pipeline interface mode quick twist (stainless steel)
Series joint sample diameter 8 (8mm * 6mm) (optional)
Bypass sampling diameter 6 (6mm * 4mm)
Communication mode RS-485
Output mode 4-20mA (active)
Secondary telecom signal high alarm point relay telecom signal, low alarm point relay telecom signal
Power supply AC 110-220V
Dimensions 160mm (height) 260mm (width) 300mm (depth)
Note 1 mg/L = 1 g/m3=467PPM
Free warranty 24 months (host)
Note Standard configuration (built-in): flowmeter, ozone tail gas catalyst, intake filter

  • Previous:
  • Next: